howtosolvetheproblemoffuelconsumptionofraymondo?
Raymon mill is the 1 kind of commonly used industrial equipment, but in the process of use, there may be wear oil problems, which will affect the normal operation of the equipment. The following is a solution to the problem.
Step 1: Check the color and quality of the wear oil
When performing maintenance and changing the oil, it is necessary to check the color and quality of the wear oil. If the wear oil becomes black or the oil quality becomes poor, the oil needs to be replaced.
The second step: regular replacement of oil
Regular replacement of oil is an effective way to prevent wear oil problems. Under normal circumstances, it is recommended to conduct a comprehensive inspection and maintenance of the equipment every quarter, and replace the oil.
The third step: the correct use of wear oil
The correct use of wear oil is also the key to keep the equipment running normally. When using wear oil, you need to pay attention to the following matters:
Choose the correct wear oil: Different types of wear oil are suitable for different equipment, and it is necessary to choose the appropriate wear oil according to the requirements of the equipment.
Reasonable filling of wear oil: When filling wear oil, it is necessary to operate in accordance with the requirements of the equipment and the specified standards, not too much or too little.
Preservation of abrasion oil: abrasion oil should be kept in a dry, ventilated and cool place to avoid direct sunlight or pollution.
The fourth step: regular replacement of equipment wear parts
The wear parts of the equipment are an important factor in the problem of wear oil. Regular replacement of the wear parts of the equipment can reduce the amount and frequency of wear oil.
The above is the method to solve the problem of fuel consumption of Raymon mill, I hope it will help you.
Tel：
Address：
Fax：
E-mal：
