Pendulum mill is the 1 commonly used crushing equipment, widely used in chemical, food, pharmaceutical and other industries. It uses the principle of swing motion to grind the material in the grinding disc to achieve the purpose of crushing.
Working principle
The pendulum mill is composed of grinding plate, swing arm, transmission device, motor and other parts. The motor drives the swing arm to reciprocate through the transmission device, so that the material in the grinding disc is rubbed and ground in the grinding disc, and finally crushed into a product with the required particle size.
The characteristic of the pendulum mill is that the central axis of the grinding disc and the axis of the swing arm are not in the same plane. Therefore, during operation, the swing arm not only makes a simple reciprocating motion, but also drives the grinding disc to make a corresponding rotary motion. This design can not only improve the crushing efficiency, but also reduce the residence time of the material in the grinding disc, and avoid the problem of excessive crushing of the material.
Scope of application
The pendulum mill is suitable for crushing various brittle materials, such as hard and brittle chemical raw materials, food raw materials, pharmaceutical raw materials, etc. Its high crushing efficiency, low energy consumption, less dust, low noise and other advantages, making it an essential equipment in the chemical, pharmaceutical and food industries.
Precautions
During the operation of the pendulum mill, attention should be paid to regularly check the lubrication of the transmission device, bearings and other parts to ensure the normal operation of the equipment.
Operators should use the equipment correctly in accordance with the operating procedures to avoid personal injury and equipment damage.
When cleaning the equipment, the power supply should be stopped and the equipment should be completely stopped before cleaning and maintenance work.
In the process of use, if there is an abnormal phenomenon, it should be sto